Get an instant quote from our most experienced consultants.
Contact Form Demo

Why The Blue Light Laser Separation Machine Is Your Better Choice?

Forward Lab
June 21, 2022
Difficulty
★☆☆ Low
Step
4
Required Time
No

Excerpt

Since the Blue Light Laser Separation Machine come up, many repairpersons are curious about it and they do not know what the difference with the old laser machine. To let you know more about the blue laser machine, today we would tell you what the big differences between them.

Since a Blue Light Laser Separation Machine come up, many repair persons are curious about it and they do not know what are the differences with an old laser machine. Due to let you know more about the blue laser machine, today we would tell you what the main differences between them.

Why The Blue Light Laser Separation Machine Is Your Better Choice?

First, dust does not get into the phone or into the camera during the process.

As you know, the old laser machine needs to laser twice to remove back glass cover.

You can see there are many black ashes sticking on the machine after the first laser by old laser machine.

However, for the Blue Light Laser Separation Machine, we only use it to laser the back glass cover one time and the machine is very clean without any dust and ash inside after using it.

The most different is that the old laser machine needs to laser second time and even third time to remove glue. And there would be many dust flying around when using it, so it would increase the odds that the dust gets into the phone or into the camera.

Second, the glass is shatter, easier to separate.

If you have ever used the old laser machine, you would find out that it’s still hard to remove the back glass cover even though you have already used the old laser machine.

It just can remove the coating under the back glass for the first laser work. The glass is more difficult to be separated than using Blue Light Laser Separation Machine.

You can see there are many cracks in the back glass after using Blue Light Laser Separation Machine. It makes the glass be more fragile and easier to remove.

Third, one time to do all the work, free your hands.

When you use the Blue Light Laser Machine, you only need to put the broken back glass into the working area, and then choose the drawing and press the start button. No need to stop it during the process. You can use this spare time flexibly to do other repair jobs.

However, the process of the old laser machine is divided into three sections. The first time is to separate the coating of the back cover, the second time is to remove glue and the third time is to remove glue again. The key point is that you are not able to focus on other repair jobs.

Forth, more safe and convenient to remove glue.

By the way, share some lamination tips to you that is there are two ways to laminate a new back glass.

One is to keep the original glue on the frame as it can limit the height. The new cover’s height would be fitter with the original height and perfect to fit with the frame height. We really recommend this new way.

The other is if you want to use the old method, you can adjust the power higher. And using alcohol to clean it up after the laser.

Those four points above are the reasons what we want to share with you. Which one is better for you, I think you have got the answer after reading this passage.

Thanks for your reading.

Leave a Reply

Your email address will not be published. Required fields are marked *